| |
|
|
| |
No drive? Then Becker has just the right
solution for you!
Top-quality
comfort at the push of a button! Regardless
of whether it’s a tubular drive for roller shutters, sun protection
systems or a drive for your garage door – if you wish to make
your life more pleasant with pushbutton or programme-controlled
drive systems, BECKER-Antriebe provides competent solutions you
can rely on.
Please select your field of interest at the right
...
BECKER - It´s that easy.
|
|
| |
| |
|
| |
BECKER Tubular Motors |
| |
|
| |
|
|
|
| |
|
| |
With Mechanical Limit Switches : |
| |
|
 |
|
|
| |
|
| |
With Electronic Limit Switches |
| |
|
|
|
|
| |
|
| |
With InBuilt Recievers |
| |
|
| |
|
|
|
| |
|
|
| |
|
|
| |
| |
Tubular drives with mechanical
limit switches for winding shafts from Ø 38mm
P5/20M - P13/9M
|
|
| |
 |
|
| |
Highlights
 Quiet,
smooth operation
Easy
setting of final positions
Overheat
protection for motor
Shutter
/ screen / cloth can be wound up around motor head
For
roller shutter and sun protection applications
Details
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
No fixed buffers required for operation
No stoppers in visible area
Easy setting of final positions
No special tools required to set final positions
Flexible installation tool for final positions (optional)
Precise final position settings even in non-easy access
constructional designs
For use in roller shutter and sun
protection applications
No extra storage space required due to different types of
drive
Shutter/screen/cloth can be wound up around motor
head
Suitable for use in applications with even very limited space
Combinable with all Becker wall bracket plates
Adaptable to multiple applications
No extra storage space required due to different types of
drive
Overheat protection for motor
In the event of overheating, the temperature sensor will
automatically switch off the motor to prevent damage
to motor and shutter
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Tubular drives with mechanical
limit switches for winding shafts from Ø 50mm
R8/17M - R50/11M |
|
| |
 |
|
| |
Highlights
Quiet,
smooth operation
Easy
setting of final positions
Overheat
protection for motor
Shutter
/ screen / cloth can be wound up around motor head
For
roller shutter and sun protection applications
Details
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
No fixed buffers required for operation
No stoppers in visible area
Easy setting of final positions
No special tools required to set final positions
Flexible installation tool for final positions (optional)
Precise final position settings even in non-easy access
constructional designs
For use in roller shutter and sun protection applications
No extra storage space required due to different types of
drive
Shutter/screen/cloth can be wound up around motor
head
Suitable for use in applications with even very limited space
Combinable with all Becker wall bracket plates
Adaptable to multiple applications
No extra storage space required due to different types of
drive
Overheat protection for motor
In the event of overheating, the temperature sensor will
automatically switch off the motor to prevent damage
to motor and shutter
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Tubular drives with mechanical
limit switches for winding shafts from Ø 63mm
R44/14M - R120/11M
|
|
| |
 |
|
| |
Highlights
Quiet,
smooth operation
Easy
setting of final positions
Overheat
protection for motor
Shutter
/ screen / cloth can be wound up around motor head
For
roller shutter and sun protection applications
Details
Suitable for left and right-hand installation
No extra storage space required` due to different types of
drive
No fixed buffers required for operation
No stoppers in visible area
Easy setting of final positions
No special tools required to set final positions
Flexible installation tool for final positions (optional)
Precise final position settings even in non-easy access
constructional designs
For use in roller shutter and sun protection applications
No extra storage space required due to different types of
drive
Shutter/screen/cloth can be wound up around motor
head
Suitable for use in applications with even very limited space
Combinable with all Becker wall bracket plates
Adaptable to multiple applications
No extra storage space required due to different types of
drive
Overheat protection for motor
In the event of overheating, the temperature sensor will
automatically switch off the motor to prevent damage
to motor and shutter
[<< back
]
|
|
| |
|
|
| |
|
|
| |
| |
Tubular drives with electronic
limit switches for winding shafts from Ø 38mm
P5/20S - P9/16S
|
|
| |
 |
|
| |
Highlights
Quiet, smooth operation
Automatic
screen lenght adjustment
Parallel
switching possible without switch fuse
Optimum
closing force adjustment
Suitable
for multiple applications
Details
Automatic screen length adjustment
Automatic screen length adjustment to compensate for
changes caused by temperature influences or ageing
No readjustment of sun protection system necessary
Optimum closing force adjustment
Constant adjustment of closing forces to protect screen
and seams
Suitable for use in multiple sun protection applications
No extra storage space required due to different types of
drive
Parallel switching
No additional costs, extra work or extra space requirements
for parallel switching with switch fuse
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
Easy setting of final positions
Final positions can be easily set from the ground –
no access to drive necessary
Screen can be wound up around motor head
Suitable for use in applications with even very limited space
Overheat protection for motor
In the event of overheating, the temperature sensor will
automatically switch off the motor to prevent damage
to motor and screen
Jam detection
Protective system shut-off in the event of screen jamming.
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Tubular drives with electronic
limit switches for winding shafts from Ø 50mm
R8/17PS - R50/11PS(+) |
|
| |
 |
|
| |
Highlights
Quiet,
smooth operation
Automatic
cloth length adjustment
Paralell
switching possible without switch fuse
Optimum
closing force adjustment
Suitable
for multiple applications
No
installation set required to programme final positions
Details
Automatic cloth length adjustment in systems featuring
buffers
Automatic cloth adjustment to compensate for changes
caused by temperature influences or ageing
No readjustment of sun protection system necessary
No fixed buffers required for operation
Suitable for awnings with or without buffer systems
No extra storage space required due to different types of
drive
Final position programming without installation set
No special installation set required to programme final
positions
Final position settings can be changed on site without any
special installation set
Optimum closing force adjustment
Constant adjustment of closing forces to protect awning
cloth and seams
Greater closing force for cassette awnings (PS+)
Prevents cloth from getting soiled through open cassettes
Suitable for multiple applications with various types
of awnings
No extra storage space required due to different types
of awnings
Parallel switching
No additional costs, extra work or extra space requirements
for parallel switching with switch fuse
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
Easy setting of final positions
Final positions can be easily set from the ground –
no access to drive necessary
Easy-mount mounting pins
No special tools required to fit or remove mounting pins
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Tubular drives with electronic
limit switches for winding shafts from Ø 63mm
R8/17PS - R50/11PS(+) |
|
| |
 |
|
| |
Highlights
Quiet,
smooth operation
Automatic
cloth length adjustment
Parallel
switching possible without switch fuse
Optimum
closing force adjustment
Suitable
for multiple applications
No
installation set required to programme final positions
Details
Automatic cloth length adjustment in systems featuring
buffers
Automatic cloth adjustment to compensate for changes
caused by temperature influences or ageing
No readjustment of sun protection system necessary
No fixed buffers required for operation
Suitable for awnings with or without buffer systems
No extra storage space required due to different types of
drive
Final position programming without installation set
No special installation set required to programme final
positions
Final position settings can be changed on site without any
special installation set
Optimum closing force adjustment
Constant adjustment of closing forces to protect cloth
and seams
Greater closing force for cassette awnings (PS+)
Prevents cloth from getting soiled through open cassettes
Suitable for multiple applications with various types
of awnings
No extra storage space required due to different types
of awnings
Parallel switching
No additional costs, extra work or extra space requirements
for parallel switching with switch fuse
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
Easy setting of final positions
Final positions can be easily set from the ground –
no access to drive necessary
Easy-mount mounting pins
No special tools required to fit or remove mounting pins
[<< back
]
|
|
| |
|
|
| |
|
|
| |
| |
Tubular drives with integrated
radio receiver for winding shafts from Ø 38mm
P5/20PSF - P9/16PSF |
|
| |
 |
|
| |
Highlights
Interference-free
radio frequency
Quiet,
smooth operation
No
wiring to control element required
Simple
programming
Optimum
closing force adjustment
Automatic
cloth lenght adjustment
Details
Integrated radio receiver
No wiring to control elements required
Easy and no-mess installation as no wiring to the control
point has to be installed
Control elements can be positioned at any chosen point
Programming via transmitter
No separate installation set is required for programming
No fixed buffers required for operation
Suitable for awnings with or without buffer systems
No extra storage space required due to different types of
drive
Automatic cloth length adjustment in systems featuring
buffers
Automatic cloth adjustment to compensate for changes
caused by temperature influences or ageing
No readjustment of sun protection system necessary
Optimum closing force adjustment
Constant adjustment of closing forces to protect cloth
and seams
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
Intermediate position
High degree of comfort thanks to simple adjustment to any
given intermediate position
Individual, group and central control with up to
16 transmitters possible
Group control possible at any time - no wiring installations
required
No mess or extra work caused by wiring installations
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Tubular drives with integrated
radio receiver for winding shafts from Ø 50mm
R8/17PSF - R50/11PSF(+)
|
|
| |
 |
|
| |
Highlights
Interference-free
radio frequency
Quiet,
smooth operation
No
wiring to control element required
Simple
programming
Optimum
closing force adjustment
Automatic
cloth lenght adjustment
Details
Integrated radio receiver
No wiring to control elements required
Easy and no-mess installation as no wiring to the control
point has to be installed
Control elements can be positioned at any chosen point
Programming via transmitter
No separate installation set is required for programming
No fixed buffers required for operation
Suitable for awnings with or without buffer systems
No extra storage space required due to different types of
drive
Automatic cloth length adjustment in systems featuring
buffers
Automatic cloth adjustment to compensate for changes
caused by temperature influences or ageing
No readjustment of sun protection system necessary
Optimum closing force adjustment
Constant adjustment of closing forces to protect cloth
and seams
Greater closing force for cassette awnings (PSF+)
Prevents cloth from getting soiled through open cassettes
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
Intermediate position
High degree of comfort thanks to simple adjustment to any
given intermediate position
Individual, group and central control with up to
16 transmitters possible
Group control possible at any time - no wiring installations
required
No mess or extra work caused by wiring installations
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Tubular drives with integrated
radio receiver for winding shafts from Ø 63mm
R44/14PSF(+) - R120/11PSF(+) |
|
| |
|
|
| |
Highlights
Interference-free
radio frequency
Quiet,
smooth operation
No
wiring to control element required
Simple
programming
Optimum
closing force adjustment
Automatic
cloth lenght adjustment
Details
Integrated radio receiver
No wiring to control elements required
Easy and no-mess installation as no wiring to the control
point has to be installed
Control elements can be positioned at any chosen point
Programming via transmitter
No separate installation set is required for programming
No fixed buffers required for operation
Suitable for awnings with or without buffer systems
No extra storage space required due to different types of
drive
Automatic cloth length adjustment in systems featuring
buffers
Automatic cloth adjustment to compensate for changes
caused by temperature influences or ageing
No readjustment of sun protection system necessary
Optimum closing force adjustment
Constant adjustment of closing forces to protect cloth
and seams
Greater closing force for cassette awnings (PSF+)
Prevents cloth from getting soiled through open cassettes
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
Intermediate position
High degree of comfort thanks to simple adjustment to any
given intermediate position
Individual, group and central control with up to
16 transmitters possible
Group control possible at any time - no wiring installations
required
No mess or extra work caused by wiring installations
[<<
back ]
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
Centronic EasyControl
EC541
|
|
| |
 |
|
| |
Highlights
Highlights
Interference-immune
radio frequency
Large
operating range
Battery
status indicator
Labelling
space
Powered
by standard batteries
Details
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Centronic design
The device’s modern design is tailored towards Centronic
control products
Battery status indicator via transmit LED
Prevents unexpected functional failure
due to discharged batteries
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Labelling space
Smudge-proof inlay card beneath transparent cover
provides space to assign individual channels
Wall holder
Wall holder to house transmitter when not in use
Intermediate positions
Added comfort thanks to easy shutter adjustment
to sunshade or ventilation position
Alternating code in transmission protocol
Protection from unauthorised copying of transmission data
High system security offers protection from unauthorised use
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic EasyControl
EC545
|
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Large
operating range
Groupings
shown on LED display
Labelling
space beside LEDs
Battery
status indicator
Powered
by standard batteries
Details
5-channel handheld transmitter
One transmitter for up to 5 different receivers or groups
Individual or central control
Transmission channel display
The LED display shows which transmission channel has
been assigned to receiver
Labelling space beside LED
Smudge-proof inlay card beneath transparent cover
provides space to assign individual channels
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Centronic Design
The device’s modern design is tailored towards Centronic
control products
Battery status indicator via transmit LED
Prevents unexpected functional failure due to discharged
batteries
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Wall holder
Wall holder to house transmitter when not in use
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic
EasyControl EC42
|
|
| |
 |
|
| |
Highlights
Can
be used as a nonlocking or a
locking pushbutton switch
One
function per button
(UP, STOP, DOWN)
Details
Locking/nonlocking pushbutton switch
Can be used as a nonlocking or a locking pushbutton
switch
Reduced stock requirements
Flush-mounted installation
Can be fitted into any flush-mounted switch box, ø
58 mm
Centronic design
The device’s modern design is tailored towards Centronic
control products
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic
EasyControl EC41
|
|
| |
 |
|
| |
Highlights
Can
be used as a nonlocking or a locking
pushbutton switch
Attractive
surface housing
One
function per button
(UP, STOP, DOWN)
Details
Locking/nonlocking pushbutton switch
Can be used as a nonlocking or a locking pushbutton
switch
Reduced stock requirements
Slim surface-mounted housing
Space-saving installation
Centronic design
The device’s modern design is tailored towards
Centronic control products
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic
EasyControl EC52
|
|
| |
 |
|
| |
Highlights
Can
be used as a nonlocking
or a locking pushbutton switch
Compatible
with many types
of switchgear
One
function per button
(UP, STOP, DOWN)
Details
Locking / nonlocking pushbutton switch
Can be used as a nonlocking or a locking pushbutton
switch
Reduced stock requirements
Flush-mounted installation
Can be fitted into any flush-mounted switch box, ø
58 mm
Centronic design
The device’s modern design is tailored towards Centronic
control products
Adapter frames
Broadly compatible with standard switchgear
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
[<< back
]
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
Centronic
UnitControl UCR520
|
|
| |
 |
|
| |
Highlights
Integrated
radio receiver
Individual
and group controller
Manual/automatic
sliding switch
Centronic
design
Practical
LED display
Details
Universal use
Can be used for group or central control
Reduced storage requirements
Additional operating element
An additional operating element can be connected to
enable operation from several locations
Radio receiver for Centronic transmitter
Remote control via wireless operating element
Group or central control possible with no additional wiring
required
LED display for emergency signals
Example wind alert signal from sun protection control
is displayed
Intermediate positions
Added comfort thanks to easy shutter adjustment to
sunshade or ventilation position
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
Tilt control for venetian blinds slats
The tilt control adjusts the slats precisely
Manual/automatic sliding switch
Central control commands can be deactivated using the
sliding switch
Current operating mode is easily identified
Installation
Claw-type connectors on the device allow for universal use
Operating element is inserted at the end of installation,
protecting it from exposure to dirt
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic
UnitControl UC42
|
|
| |
 |
|
| |
Highlights
Compatible
with any type of switchgear
Fits
into any switch box
One
device for individual and central control
Timers
and sun protection controls
can
be connected in series
Removable
plug-in terminals
Details
Universal design
Compatible with any type of switchgear
Installation
Installed into deep switch box behind operating element
No special flush-mounted box necessary
Removable plug-in terminals
No special tools required
Connection
No special control wires required
Operated via multi-wire mains cable
Universal use
Can be used for group control, sub-group control and
central control with individual operation for drives for
roller shutters and sun shades
Reduced stock requirements
Tilt control for venetian blinds slats
The tilt control adjusts the slats precisely
Operating elements
Grouping and central control with various different
control elements possible
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic UnitControl
UC52 |
|
| |
 |
|
| |
Highlights
Individual
and group controller
Manual/automatic
sliding switch
Centronic
design
Practical
LED display
Details
Universal use
Can be used for group or central control
Reduced storage requirements
Additional operating element
An additional operating element can be connected to
enable operation from several locations
LED display for emergency signals
Example wind alert signal from sun protection control
is displayed
Intermediate positions
Added comfort thanks to easy shutter adjustment to
sunshade or ventilation position
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
Tilt control for venetian blinds slats
The tilt control adjusts the slats precisely
Manual/automatic sliding switch
Central control commands can be deactivated using the
sliding switch
Current operating mode is easily identified
Installation
Claw-type connectors on the device allow for universal use
Operating element is inserted at the end of installation,
protecting it from damage
Adapter frames
Broadly compatible with standard switchgeare.
[<< back
]
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
Centronic VarioControl
VC420
|
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Lage
operating range
Fits
into standard flush-mounted boxes
Programming
and grouping possible without access to receiver
Can
be used as a lighting control device
Details
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Intermediate positions
Added comfort thanks to easy shutter adjustment
to sunshade or ventilation position
Alternating code in transmission protocol
Protection from unauthorised copying
of transmission data
High system security offers protection from
unauthorised use
Up to 16 Centronic transmitters can be programmed
Grouping can also be done at a later data
with no extra wiring required
No dirt and extra work as no wiring is necessary
Flush-mounted installation
Can be fitted into any flush-mounted switch box, ø
58 mm
Ideal for retrofit projects
Universal use
Can be used for roller shutters, sun protection and lighting
Reduced stock requirements
[<< back
] |
|
|
|
|
| |
|
|
| |
| |
Centronic VarioControl
VC421
|
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Lage
operating range
Fits
in flush-mounted box behind operating element
Universal
control
Central
inputs
Details
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Alternating code in transmission protocol
Protection from unauthorised copying of transmission
data
High system security offers protection from
unauthorised use
Flush-mounted installation
Can be fitted into any flush-mounted switch box, ø
58 mm
Ideal for retrofit projects
Installation
Can be installed in deep switch boxes, e.g. behind timer
Becker radio-controlled drives can be operated by control
devices from other manufacturers
Central inputs
Operation from central point possible
Can be integrated into groups
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic VarioControl
VC520
|
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Lage
operating rage
Fits
into standard flush-mounted boxes
Programming
and grouping possible without access to the receiver
Zero
potential switch contact
Details
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Intermediate positions
Added comfort thanks to easy shutter adjustment to
sunshade or ventilation position
Alternating code in transmission protocol
Protection from unauthorised copying of transmission
data
High system security offers protection from
unauthorised use
Up to 16 Centronic transmitters can be programmed
Grouping can also be done at a later data with no extra
wiring required
No dirt and extra work as no wiring is necessary
Flush-mounted installation
Can be fitted into any flush-mounted switch box, ø
58 mm
Ideal for retrofit projects
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
Zero potential switch contact
Can be used as an individual or group control device
Reduced storage requirements
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic VarioControl
VC320
|
|
| |
 |
|
| |
Highlights
Interference-immune
radio grequency
Lage
operating range
Fits
into standard flush-mounted boxes
Compact
mounting form
Mountable
in roller shutter
Details
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Intermediate positions
Added comfort thanks to easy shutter adjustment
to sunshade or ventilation position
Alternating code in transmission protocol
Protection from unauthorised copying
of transmission data
High system security offers protection from
unauthorised use
Up to 16 Centronic transmitters can be programmed
Grouping can also be done at a later data
with no extra wiring required
No dirt and extra work as no wiring is necessary
Compact mounting form
Fits into most roller shutter boxes
Fixing via adhesive pads
[<< back
]
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
Centronic MemoControl
MC42
|
|
| |
 |
|
| |
Highlights
Intelligent
pushbutton with automatic mode
Switching
times are easily programmable
Both
manual control and automatic switching times are possible
Practical
LED display
Centronic
design
Details
2 switching times
Easy programming (press control button for 6 sec)
of up to 2 switching times (1 x UP, 1 x DOWN)
Daily repetition
Manual/automatic sliding switch
Automatic switching times can be deactivated using
the sliding switch
Current operating mode is easily identified
LED display
Pre-programmed switching times are displayed via LED
Intermediate positions
Added comfort thanks to easy shutter adjustment to
sunshade or ventilation position
Adapter frames
Broadly compatible with standard switchgear
Installation
Claw-type connectors on the device allow for universal use
Operating element is inserted at the end of installation,
protecting it from damage
Universal use
Can be used for roller shutters and for sun protection
Reduced stock requirements
Centronic design
The device’s modern design is tailored towards Centronic
control products
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic MemoControl
MC441 |
|
| |
 |
|
| |
Highlights
Intelligent
pushbutton with automatic mode
Switching
times are easily programmable
Both
manual control and automatic switching times are possible
Practical
LED display
Centronic
design
Details
2 switching times
Easy programming (press control button for 6 sec)
of up to 2 switching times (1 x UP, 1 x DOWN)
Daily repetition
Manual/automatic sliding switch
Automatic switching times can be deactivated using the
sliding switch
Current operating mode is easily identified
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Centronic design
The device’s modern design is tailored towards Centronic
control products
Battery status indicator via transmit LED
Prevents unexpected functional failure due to discharged
batteries
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Memory function for switching times
Stored switching times are not lost when batteries are
replaced
Labelling space
Smudge-proof inlay card beneath transparent cover
provides space to assign individual channels
[<< back
]
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
Centronic TimeControl
TC42 |
|
| |
 |
|
| |
Highlights
Date,
time and control programme is pre-set
Lage,
well-arranged display
Easy
programming thanks to textual support
Power
reserve in the event of power loss
Astro
evening function
Holiday
programme
Details
Pre-set timer
Minimum installation effort thanks to pre-set time, date
and astro evening function
Large display
Good legibility thanks to large digits and text line
Astro evening function
The roller shutters are closed, for example at sunset
Reduced heat loss through open roller shutters at night
The switching times do not have to be reset
Block switching programme
Individual switching times can be easily set for working
week (Mon-Fri) and weekend (Sat & Sun)
Holiday function
The switching times for your roller shutters are randomly
varied every day, making your home appear occupied
Automatic clock adjustment for daylight saving
changes
Clock does not have to be adjusted manually
Display information in the selected language
User-friendly operation thanks to text-oriented
programming
Power reserve
Stored settings will not be lost in the event of power loss
Intermediate positions
Added comfort thanks to easy shutter adjustment to
sunshade or ventilation position
Adapter frames
Broadly compatible with standard switchgear
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic MemoControl
MC411 |
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Large
operating range
Switching
times are easily programmable
Battery
status indicator
Powered
by standart batteries
Plain
and simple installation
Details
2 switching times
Easy programming (press control button for 6 sec)
of up to 2 switching times (1 x UP, 1 x DOWN)
Daily repetition
Manual/automatic sliding switch
Automatic switching times can be deactivated using the
sliding switch
Current operating mode is easily identified
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Large operating range
Interference-immune operation in living areas
Centronic design
The device’s modern design is tailored towards Centronic
control products
Battery status indicator via transmit LED
Prevents unexpected functional failure due to discharged
batteries
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Memory function for switching times
Stored switching times are not lost when batteries are
replaced
Intermediate positions
Added comfort thanks to easy shutter adjustment to
sunshade or ventilation position
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic TimeControl
TC445 |
|
| |
 |
|
| |
Highlights
Date,
time and control programme is pre-set
Large,
well-arranged display
Easy
programming thanks to textual support
Grouping
shown on LED display
Pre-set
control commands are not deleted when
batteries are replaced
Astro
evening function
Holiday
programme
Details
Astro evening function
The roller shutters are closed, for example at sunset
Reduction of heat loss due to open roller shutters at dark
The switching times do not have to be reset
Block switching programme
Individual switching times can be easily set for working
week (Mon-Fri) and weekend (Sat & Sun)
Display information in the selected language
User-friendly operation thanks to text-oriented
programming
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
5-channel handheld transmitter
One transmitter for up to 5 different receivers or groups
Individual or central control
Holiday function
The switching times for your roller shutters are randomly
varied every day, making your home appear occupied
Automatic clock adjustment for daylight saving
changes
Clock does not have to be adjusted manually
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Transmission channel displayed
The LED display shows which transmission channel has
been assigned to receiver
Inlay card beside LED
Smudge-proof inlay card beneath transparent cover
provides space to assign individual channels
[<< back
]
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
Centronic SensorControl
SC431 |
|
| |
 |
|
| |
Highlights
Wireless
connection to receiver
Sunshade
and twillight function
Integrated
glass-break vibration sensor
No
cables
Can
be easily fitted onto window pane
Details
Large operating range
Interference free operation in living areas
Sunshade function
Automatic sunshade function based on sunlight intensity
to protect property
Twilight function
Shutter is automatically closed at twilight
Integrated glass-break vibration sensor
Shutter is automatically closed if glass breakage
is detected
Wireless connection to receiver
No unsightly wires
No cables in window thanks to battery operation
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Alternating code in transmission protocol
Protection from unauthorised copying of transmission
data
High system security offers protection from
unauthorised use
UP / STOP / DOWN button
Combination button for individual control commands
Small product size
Inconspicous installation on window
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic SunWindControl
SWC411 |
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Lage
operating range
Threshold
values can be easily set
Battery
status indicator
Powered
by standard batteries
Plain
and simple installation
Details
Threshold settings
The threshold values can easily be set and adjusted
in the transmitter
Manual/automatic sliding switch
Automatic sunshade function can be deactivated using
the sliding switch
Current operating mode is easily identified
Large operating range
Interference-immune operation in living areas
Battery status indicator via transmit LED
Prevents unexpected functional failure due to discharged
batteries
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Intermediate positions
Added comfort thanks to easy adjustment of two individual
intermediate positions
Centronic design
The device’s modern design is tailored towards Centronic
control products
Radio frequency
State-of-the-art technology with interference-immune
transmit frequency
Alternating code in transmission protocol
Protection from unauthorised copying of transmission
data
High system security offers protection from unauthorised
use
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic SunWindControl
SWC441 |
|
| |
 |
|
| |
Highlights
Interference-immune
radio frequency
Lage
operating range
Threshold
values can be easily set
Battery
status indicator
Powered
by standard batteries
Labelling
space
Details
Threshold settings
The threshold values can easily be set and adjusted in
the transmitter
Manual/automatic sliding switch
Automatic sunshade function can be deactivated using
the sliding switch
Current operating mode is easily identified
Large operating range
Interference-immune operation in living areas
Battery status indicator via transmit LED
Prevents unexpected functional failure due to discharged
batteries
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Intermediate positions
Added comfort thanks to easy adjustment of two individual
intermediate positions
Centronic design
The device’s modern design combines well with Centronic
control products
Labelling space
Smudge-proof inlay card beneath transparent cover
provides space to assign individual channels
Wall holder
Wall holder to house transmitter when not in use
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic SunWindControl
SWC545 |
|
| |
 |
|
| |
Highlights
Wind
protection and sunshade function
Wind
and sunlight intensity values measured
by sensor are displayed
Date,
time and threshhold values are pre-set
Easy
programming thanks to textual support
Lage,
well-arranged display
Attractive
modern design
Details
Pre-set control
Minimum installation effort thanks to pre-set time,
date and threshold values
Large display
Good legibility thanks to large digits and text line
Evaluation by radio-controlled sensory equipment
Overload protection for sun protection system
High level of comfort thanks to automatic shading
in the event of strong sunlight
Sun and wind values
Current sun and wind values are shown in the display
This facilitates threshold value adjustment
Switching times
Automatic shading at the same time every day
Easily adaptable to individual requirements
Blocking times
Switching times for sunshade function can be adapted
to individual requirements
Intermediate positions
Added comfort thanks to easy adjustment of two
individual intermediate positions
Automatic clock adjustment for daylight saving
changes
Clock does not have to be adjusted manually
Display information in the selected language
User-friendly operation thanks to text-oriented
programming
Programming buttons beneath cover
Prevents accidental programme settings from
being made
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic SunWindSet SC861 |
|
| |
 |
|
| |
Highlights
Radio
link to drive
Modern
sensory equipment for wind and
sun protection
Can
be used with awnings and venetian blinds
Threshold
values can easily be set via
handheld transmitter
Power
supply though solar cell
Details
Threshold settings
The threshold values can easily be set and adjusted
in the transmitter
Attractive sensory equipment
Sun and wind sensor comes in a modern design that
matches most facades and awnings
Sun protection systems are protected from
very strong winds
High level of comfort thanks to automatic shading in
the event of strong sunlight
Large operating range
Interference-immune operation
Adjustable sensor arm
The flexible sensor arm can be adjusted to your
individual assembly needs
Wind speed measurement
Sensor is installed well away from wall to ensure
reliable wind speed measurements
Detection range of light sensor
Sunshade function even for different levels of sunlight
intensity
Radio link to drive
No unsightly wires for drive connection
Radio link monitoring
Reliable awnings protection
Universal use
Can be used for group or central control
Reduced stock requirements
[<< back
]
|
|
|
|
|
| |
|
|
| |
| |
Centronic SunWindSet SWS641
|
|
| |
 |
|
| |
Highlights
Wind
protection and sunshade control including
sensory equipment in a modern design
Threshold
values can easily be set via handheld transmitter
Can
be used with awnings and venetian blinds
Radio
link to drive
Solar
supplied sensor
Details
Threshold settings
Threshold values can easily be set and adjusted in the
transmitter
Attractive sensory equipment
Sun and wind sensor in a modern design that matches
most facades and awnings
Overload protection for sun protection system
High level of comfort thanks to automatic shading in the
event of strong sunlight
Large operating range
Interference-immune operation in living areas
Battery status indicator via transmit LED
Prevents unexpected functional failure due to discharged
batteries
Labelling space on handheld transmitter
Smudge-proof inlay card beneath transparent cover
provides space to assign individual channels
Manual/automatic sliding switch
Automatic sunshade function can be deactivated using
the sliding switch
Current operating mode is easily identified
Adjustable sensor arm
The flexible sensor arm can be adjusted to your individual
assembly needs
Intermediate positions
Added comfort thanks to easy adjustment of two individual
intermediate positions
Universal use
Can be used for group or central control
Reduced stock requirements
Battery requirements
Powered by standard batteries (LR03 microcell)
No tools required to replace batteries
Solar supplied sensor
No unsightly wires
[<< back
]
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
|
| |
Industrial Door Application |
| |
|
| |
|
|
|
| |
|
| |
with Sectional door drives
|
| |
Drives for Industrial Sectional
Doors
The spring-balanced sectional door is the most frequently
used door system in industrial applications throughout
Europe.
Therefore, the BECKER range of sectional door drives
offers
a wide selection of drives tailored to you individual
requirements.
Becker offers the following drives types, each type
in various executions:
A.C. drives 1x230 V / 50 Hz with mechanical limit switching
Three-phase drives 3x230/400 V / 50 Hz with mechanical
and electronic limit switching
Three-phase drives 3x400 V / 50 Hz with torque control
Drives for Fast-Moving Sectional Doors
Fast-moving sectional doors with conventional drive
technology are subject to extreme forces during quick
acceleration and deceleration. If you want to prevent
mechanical damage and at the same time reduce door running
times, this can be achieved using variable door running
speeds with converter technology.
BECKER offers this drive in three different models:
Three phase current with special control and frequency
converter, for a power of
1x230 V / 50 Hz with torques of 45, 65, 90 Nm at 50
Hz
(driving speed 40,52 r.p.m.) |
|
|
| |
|
|
|
|
| |
|
| |
with roller shutter door drives
|
| |
Drives for Rolling Doors
The BECKER drive series "A" and "AW"
for rolling doors: a reliable solution (without integrated
safety device)
The compact drives from our "A" and "AW"
series were particularly designed for smaller rolling
doors. The compact and well thought out design reduces
the required space and allows an installation in just
any position. The drives are available with hand crank
(HK), light chain (LK) and long hand crank (LKH)
A.C. drives 1x230 V / 50 Hz
Driving torque 120 Nm (AW120/11..)
Three-phase drives 3x230/400 V / 50 Hz
Driving torque 150, 220, 280 Nm
AF drives for rolling doors: safe, flexible
to use, comfortable (with integrated safety device)
Thanks to its big variety the BECKER "AF"
-series offers the perfect solution for your rolling
door application. The powerful three phase motors, eqipped
with a self-locking worm gear drive, are extremely silent.
They are available in 5 different versions between 170
and 750 Nm. The integrated safety device (characteristic
for all "AF" drives) works reliably, independent
from the installation position and the driving speed.
Three-phase drives 3x230/400 V / 50 Hz Driving torque
170, 250, 450, 600, 750 Nm
High-Speed Door Drives for PVC Doors
High-speed PVC doors with conventional drive technology
are subject to extreme forces during quick acceleration
and decleration. If you want to prevent mechanical damage
and at the same time reduce door running times, this
can be achieved using variable door running speeds with
converter technology.
Three-phase motors, but with power supply 1x230 V /
50 Hz 35, 50 Nm, 112 r.p.m.
|
|
|
| |
|
|
|
|
| |
|
| |
with controls
|
| |
Control Units for BECKER Door
Drives
Roller and sectional doors, roller grids, high-speed
doors and many more - the application possibilities
for door controls are almost limitless. Just like our
range of control solutions: BECKER offers a broad selection
of controls to suit every industrial application. You
will find Becker door controls designed for BECKER drives
with three-phase or alternating current, with drives
with torque control or with frequency converters. Our
controls also meet the most exacting standards with
regard to convenience and safety
We will be delighted to provide you with professional
advice and a personal quotation. Please give us a call
- we look forward to hearing from you!
S10 "Dead man's" control
S50 II Control for "dead man's operation"
or operation in self-locking mode
(with Multicard II)
S60 Control for "dead man's operation" or
operation in self-locking mode
(with Multicard II), can be extended with radio
S80 Control for "dead man's operation" or
operation in self-locking mode for drives
with mechanical or electronic limit switching, can be
extended with radio
S100DMR und S300DMR Control for drives with torque,
can be extended with radio
WSTE 1000 Duplex traffic control, can be extended with
radio
WSTE 1000 FU Duplex traffic control for high-speed doors,
can be extended with
radio
Beck-O-Tronic 4 Door control for small industrial doors
with tubular drives,modular extension with 1- or 4-channel
radio transmitter and safety switching rail evaluator
|
|
|
| |
|
| |
| |
|
|
|
| |
|
|
| |
| |
|
| |
Garage Doors |
| |
|
| |
|
|
|
| |
|
| |
with Sectional door drives
|
| |
The Beck-O-Mat 520/820 Will
Set Your Garage Door in Motion by a Touch of a Button
Electronic Drives with radio transmitter, for spring-balanced
swing and sectional doors
For those who also value security and convenience in
a garage door, BECKER opens up new horizons: with the
Beck-O-Mat 520/820 electronic garage door drive and
an innovative radioremote control. The modern handheld
transmitter means you have everything under control:
it is compatible with all popular vehicle radio systems
and allows you to operate your garage door easily at
the touch of a button. The end positions can be set
precisely thanks to the measuring of the running distance.
With respect to programming the end positions, the Beck-O-Mat
is also ahead of its time: you only need to move the
drive up and down once and the settings are adjusted
to suit your garage door.
As far as safety is concerned, the Beck-O-Mat is setting
new standars too: Thanks to its electronic obstacle
recognition, the drive stops immediately when the door
meets with an obstacle. Thus, it prevents dangerous
accidents and unwanted collisions.
Equipped with a robust steel chain and self-locking
gear, the drive also offers effective protection against
forced entry, and makes it as good as impossible for
indruders to access the garage.
General functions:
Drive capacities 500-700 Nm
Latest remote control technology with a radio system
compatible with common vehicle radio systems (Home Link®
by Audi, BMW,
Rover, Mercedes Benz)
Soft-Start and Soft-Stop
Easy setting of the drive with a single ascent and descent
of the garage door
High break-in protection thanks to the use of a high.quality
steel chain and self-locking motor gear
|
|
|
| |
|
|
|
|
| |
for rolling doors
|
| |
Highlights
Compact motor head with hand crank connection
Final positions can be setting from 2 sides
Quiet, smooth operation
Easy setting of final positions
Suitable for use with roller shutters, roller doors
and sun protection systems
Details
Integrated hand crank connection
System can be opened or closed manually, e.g. in the
event
of power outage
Hand crank can be fitted at both ends
Suitable for use in various construction designs
Suitable for left and right-hand installation
No extra storage space required due to different types
of drive
Compact motor head design
Suitable for use in applications with even very limited
space
Easy setting of final positions from 2 sides
No special tools required to set final positions
Final positions can be easily set even in non-easy access
constructional designs
Flexible installation tool for final positions
(optional)
Tool for precise final position settings even in non-easy
access constructional designs
For use in roller shutter, roller door and
sun protection
applications
No extra storage space required due to different types
of drive
Overheat protection for motor
In the event of overheating, the temperature sensor
will
automatically switch off the motor to prevent damage
to
motor and shutter/screen/cloth
No fixed buffers required for operation
No stoppers in visible area
|
|
|
| |
|
|
|
|
| |
with controls
|
| |
|
| |
|
| |
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
D.C. drives for winding
shafts from Ø 63 mm
R35/8G, R60/8G, R120/3G |
|
| |
 |
|
| |
Highlights
Quiet,
smooth operation
Easy
setting of final positions
Operation
with protective extra-low voltage possible
(12 V or 24 V)
Shutter/screen/cloth
can be wound up around motor head
Suitable
for use with swimming pool covers and
automobile superstructures
Details
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
No fixed buffers required for operation
No stoppers in visible area
Easy setting of final positions
No special tools required to set final positions
Flexible installation tool for final positions (optional)
Precise final position settings even in non-easy access
constructional designs
Suitable for protective extra-low voltages and automobile
applications
Multi-purpose drive
No extra storage space required due to different types of
drive
Shutter/curtain/cloth can be wound up around motor
head
Suitable for use in applications with even very limited space
Combinable with all Becker wall bracket plates
Adaptable to multiple applications
No extra storage space required due to different types of
drive
Operation via rechargeable battery pack possible
System can be opened or closed in the event of power outage
Operation at 12 or 24V
These drives can be used in applications where protective
extra-low voltages are necessary, e.g. for swimming pool
covers
[<< back
] |
|
|
|
|
| |
|
|
| |
| |
D.C. drives with hand-crank
override for winding shafts from Ø 63 mm
R35/8GHK |
|
| |
 |
|
| |
Highlights
Quiet,
smooth operation
Easy
setting of final positions
Operation
with protective extra-low voltage possible
(12 V or 24 V)
Shutter/screen/cloth
can be wound up around motor head
Suitable
for use with swimming pool covers and
automobile superstructures
Details
Suitable for left and right-hand installation
No extra storage space required due to different types of
drive
No fixed buffers required for operation
No stoppers in visible area
Easy setting of final positions
No special tools required to set final positions
Flexible installation tool for final positions (optional)
Precise final position settings even in non-easy access
constructional designs
Suitable for protective extra-low voltages and automobile
applications
Multi-purpose drive
No extra storage space required due to different types of
drive
Shutter/curtain/cloth can be wound up around motor
head
Suitable for use in applications with even very limited space
Combinable with all Becker wall bracket plates
Adaptable to multiple applications
No extra storage space required due to different types of
drive
Operation via rechargeable battery pack possible
System can be opened or closed in the event of power outage
Operation at 24V
These drives can be used in applications where protective
extra-low voltages are necessary, e.g. for swimming pool
covers
[<< back
]
|
|
|
|
|
